63230-314-200/A2
Chapter 3—Getting Started
8/2001
EGX200 Initial Setup
15
© 2001 Schneider Electric All Rights Reserved
The COM port properties page displays, as shown in Figure 3–11.
Figure 3–11: HyperTerminal COM Port Properties dialog box
5. In this dialog box, set the values listed in Table 3–3.
You are now ready to enter the EGX200 setup utility.
Table 3–3: Communications Settings Parameters
Settings
Value
Baud Rate
19200
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None
Summary of Contents for EGX200
Page 55: ......
