63230-314-200/A2
Chapter 4—Installation and Wiring
8/2001
Wiring Connections
27
© 2001 Schneider Electric All Rights Reserved
Ethernet Ports
The EGX200 has one on-board 10/100BaseT Ethernet port. This port supports a
twisted pair cable up to 328 ft (100 m). Use data grade twisted-pair wire. This wire must
have a characteristic impedance of 100 ohms and meet the EIA/TIA Category 5
standard wiring specifications. The cable can be either shielded twisted pair or
unshielded twisted pair.
Ethernet LEDs
The 10/100BaseT Ethernet port has one set of LEDs. The top LED is yellow, is marked
LK (Link), and illuminates when there is a proper Ethernet physical connection. The
bottom LED is yellow and illuminates when the EGX200 is receiving data (Rx). The
middle LED is green and illuminates when data is transmitted (Tx).
Summary of Contents for EGX200
Page 55: ......
