13 PH1000i OM 2010-07-13
4. OPERATING INSTRUCTIONS
4.1 Starting the engine
Before starting the engine, disconnect any loads from the AC and DC receptacles.
1.
Turn the fuel valve lever to the “ON” position.
2.
Turn the ignition switch to the “ON” position.
3.
Move the choke lever to the START position.
4.
Pull the starter grip until resistance is felt then pull the starter grip briskly toward the arrow as shown
below.
■
Do not allow the starter grip to snap back. Return it slowly by hand.
■
Do not let the starter rope rub against the generator body or the rope will
wear out prematurely.
Starter
Grip
Fuel
Valve
Engine
Switch
Choke
