Powerhorse M1175B, Owner'S Manual

Page: 55 / 94

55
Assembly Instructions
Step 16 -Fittings

Lubricate O-ring and threads on fitting with clean oil

Orientate (1) Valve Fitting so that nut/washer/O-ring assembly is
facing up. Turn fitting into cylinder port until finger-tight

Torque to 37-46 ft.-lb.

Looking at fitting from end with nut/washer O-ring assembly, turn nut
clockwise as far as possible

Use valve port marked “A “ to thread the control valve onto the fitting
until control valve touches washer

Hold control valve in orientation shown below and torque nut to 37-46
ft.-lb.
Tools Needed

7/8” Wrench
(2 needed)
OR

Crescent Wrench
(2 needed)
Fastener Needed from Parts Bag:
Valve Fitting
Qty: 1
Into
Cylinder
Nut
Washer
O-Ring
Valve Fitting
Cylinder Port
Valve Port