Powerhorse M1175B, Owner'S Manual

Page: 52 / 94

52
Assembly Instructions
Step 13 – Beam to Tank

Stand assembled beam onto the end plate in the vertical position.

Orient the beam assembly and tank weldment as shown. Make sure a
helper holds onto the top of the beam assembly during the remainder
of this step. The beam is very heavy and dangerous if it tips over

Align the pivot bracket on beam assembly to the pivot mount on the
tank weldment and insert (1)beam pivot pin

Insert (1) cotter pin through hole in beam pivot pin and spread and
bend prongs in opposite directions to secure
Tools Needed

Pliers
Fasteners Needed from Parts Bag:
Cotter Pin
Qty: 1 Beam Pivot Pin
Qty: 1
Beam Assembly
Tank Weldment
Pivot Mount
Beam Pivot Pin
Cotter Pin
Pivot Bracket