Powerhorse M1175B, Owner'S Manual

Page: 56 / 94

56
Assembly Instructions
Step 17 - Fittings

Lubricate O-ring and threads on fitting with clean oil

Looking at fitting from end with nut/washer/O-ring assembly, turn nut
clockwise as far as possible

Using wrench, turn (1) Small Swivel Fitting into valve port marked
“B” until washer touches control valve. Continue turning until washer
touches thread nearest wrench pad

Back off fitting counterclockwise not exceeding one revolution until it
is oriented in the correct position

Place wrench on the wrench pad of fitting to prevent fitting from
turning and torque nut to 37-46 ft.-lb.

Thread Small Swivel Fitting nut onto Cylinder Hose until hand tight.

Wrench tighten 2-3 Turns past Finger Tight
Tools Needed

7/8” Wrench

3/4” Wrench

1” Wrench
OR

Crescent Wrench
(2 needed)
Small
Swivel
Fitting
Cylinder
Hose
Valve Port
Fastener Needed from Parts Bag:
Small Swivel Fitting
Qty: 1
Nut
O-ring
Washer