Powerhorse M1175B, Owner'S Manual

Page: 61 / 94

61
Assembly Instructions
Step 21B – High Pressure Supply Hose for 1175 Only

Route the High-Pressure Supply Hose from the high pressure fitting
on the pump up to the Large Swivel Fitting on the control valve inlet.

Screw finger-tight High-Pressure Supply Hose to the high pressure
fitting on the pump outlet.

Wrench tighten 1.5-3.0 turns past “finger tight”

Screw finger-tight remaining end of the High-Pressure Supply Hose to
the Large Swivel Fitting on the control valve inlet.

Wrench tighten 1.5-3.0 turns past “finger tight”
Tools Needed

1” Wrench

7/8” Wrench
OR

Crescent Wrench
(2 Needed)
Large
Swivel
Fitting
High Pressure
Supply Hose
High Pressure
Supply Hose
High Pressure
Fitting
7/8” Wrench
1” Wrench