Medical Air & Laboratory Air Systems – 7.5 & 10 HP Pumps
Powerex
•
150 Production Drive
•
Harrison, OH 45030
•
USA
P 1.888.769.7979
•
F 513.367.3125
•
www.powerexinc.com
IN594402AV
•
06/2017
Page 17 of 28
Email Configuration
1. Click on the Other dropdown menu and select Email Configuration. Click on the Configuration Mode button to edit email settings.
2. Enter in the number of emails to configure and press Setup Email(s).
3. Enter in the SMTP Username. This email must have SMTP capability set up.
4. If the SMTP device requires authentication, enter in the Password for the SMTP Mail Username.
5. Enter in the SMTP Server that is being used.
6. Enter in the Email Address of the sender. This is going to be the same field as Step 3.
7. Enter in the Email Address of the recipient.
8. Select an Email Group for the user to be a part of. Multiple users may be part of a group and can receive the same alarm message.
9. Repeat steps 3-7 for multiple recipients.
10. Click Save Parameters.
11. Click Send Test Email to verify all of the email settings are correct.
12. To save changes and force the gateway back to running mode, click on the Reboot Now button and after 5 seconds hit the Refresh button.
You should see the gateway appear in Mode: Running.
