FirstCall™ Medical Gas Alarm
Operating & Maintenance Manual
Powerex • 150 Production Drive • Harrison, OH 45030 • USA
P 1.888.769.7979 • F 513.367.3125 • www.powerexinc.com
IN599102AV • 15 September 2020
Page 21 of 36
Setup and Configuration
Login to Settings
Press upper right part of screen for at least 3 seconds.
Window pops up, press the middle button for login.
For user select “USER.”
Default password is
Pass123
. This password can be
changed in the settings screen.
NOTE:
The password is
case sensitive.
Keyboard Basics
Powerex FirstCall™ Alarm System uses a full QWERTY
keyboard to easily add zone names, create customized
alarm instructions, and create customized alarm
conditions.
The keyboard has the ability to use CAPS lock, as well
as cut/copy/paste for when you want to use the same
information in a different location.
To maximize the keyboard size to fit the entire screen,
press the zoom button in the upper left corner.
The PLC has a USB port on the side. A keyboard or
a mouse with a USB connection can plug into the PLC
and be used for setup and navigation. There is only 1
USB port, so to use both the keyboard and a mouse, a
separate USB splitter is required.
Once the correct password is entered, the alarm
panel will now be in “Settings” mode. The Test button
at the bottom will be changed to a “Settings” gear icon.
Zone Served Block
Click the lower right black-colored bar on the home
screen to add text to the Zone Served Block. There is
enough room for 3 lines of text.
Gas Badges (Area & Combo only)
Text can be added to the black-colored bar underneath
the gas to further specify the location where each gas
is being used.
Summary of Contents for AAP10-OAV
Page 2: ......
