Mode Selector
(J)
This switch will toggle between one of the five cleaning modes available on the
Phoenix 30/34
CLEANING MODES
1. REGULAR
SCRUB MODE
When the
machine is
running in this
mode, the
machine will
perform all
operations. This
mode can be
used for day-to-
day tasks under
normal
conditions. When
the operator sets
the
directional switch
to
forward
and activates the
accelerator handle,
the solution
pump will turn on, the brushes will turn on and be lowered to the floor, as well as the
rear squeegee. While operating in this mode, the solution will be dispersed into the
brushes, which will scrub the floor allowing the chemical in the solution to break down
the dirt on the floor. As the machine continues to move forward, the rear squeegee
and vacuum system will recover the dirt and dispensed solution. If the operator stops
moving, the machine will automatically raise the scrub deck and turn off the brushes.
If the
directional switch
is changed to reverse the machine will continue to operate
normally, only the rear squeegee will raise up.
2. HEAVY SCRUB MODE
This mode is similar to
Regular Scrub.
The machine will continue to operate the same
was as if it was in
Regular Scrub Mode
, only this mode applies more solution and
brush pressure is increased. This mode is used for high traffic areas and areas that
have been heavily soiled, but do not require time for the solution to soak.
3. DOUBLE SCRUB MODE
When the machine is running in this mode, the machine will perform all operations
except dirty solution recovery. This mode can be used if the floor is heavily soiled and
the chemical will need additional time to emulsify grease and oils that are on the floor.
When the operator sets the
directional switch
to either the
forward
or
reverse
position
and activates the
accelerator lever,
the solution pump will turn on, the brushes will turn
on and be lowered to the floor. While operating in this mode, the solution will be
dispersed into the brushes, which will scrub the floor allowing the chemical in the
solution to break down the dirt on the floor. As the machine continues to move forward
or back, the rear squeegee and vacuum system are not on, which allows the solution
to stay on the floor emulsifying the grease and oil. If the operator stops moving in
either direction, the machine will automatically raise the scrub deck and turn off the
7
