Owner’s Manual
R
PowerBoss, Inc. A Member of the Hako Group ©
2007
PowerBoss
®
CORE 50 Sweeper Scrubber
Page
17
PowerBoss
®
The Power of Clean
MAIN SCRUB
BRUSHES
(Continued)
DOUBLE
SCRUBBING
5. Lower the squeegee with the squeegee switch. The
squeegee can also be raised with the same switch.
Lowering the squeegee activates the scrubbing impeller
automatically. When the squeegee is raised, the
impeller will continue to run for ten (10) seconds before
shutting off.
When machine travel stops, the scrub brushes stop rotating
and solution flow is interrupted until travel resumes. This
prevents flooding the floor and prevents excessive brush
wear and floor damage.
6. Drive forward slowly.
Use care when driving on wet surfaces.
Always travel slowly on grades.
For double scrubbing, proceed as follows:
1. Follow the procedures on the previous page for
scrubbing
without
lowering the squeegee to the floor
and with the sweeping brooms off.
2. Make multiple passes over the same area of the floor as
conditions dictate.
3. Lower the squeegee with the squeegee switch for the
final pass. The squeegee can be raised with the same
switch.
SCRUBBING CONTROLS
NOTE
CAUTION
CAUTION
