Owner’s Manual
R
PowerBoss, Inc. A Member of the Hako Group ©
2007
PowerBoss
®
CORE 50 Sweeper Scrubber
Page
22
PowerBoss
®
The Power of Clean
OPERATING ON
GRADES
SWEEPING
EMPTYING THE
HOPPER
1. Always travel slowly.
2. Exercise extreme caution when traveling across or
turning on grades
3. Use the brake pedal only for slowing the machine on
grades.
1. Lower the Brooms
٭ Lower the side broom by pressing the right side of the
side broom switch.
٭ Lower the main broom by pressing the right side of
the main broom switch.
* When sweeping extremely uneven floors, position the
FLOAT
lever in the lowered position.
2. Drive the machine over the area to be swept.
1. Drive the machine to an approved dumping area.
2. Shake the filters for 20 to 30 seconds.
3. Use the directional control pedal to position the machine
so that the space between the machine and the
container or dumpster is adequate to raise the hopper.
4. Reduce the engine speed.
5. Pull back the lever to the
RAISE
position and hold until
the bottom of the hopper is high enough to clear the top
of the container.
Never place your hands or other body parts near the lift
arms when the hopper is operating.
6. Use the directional control pedal to slowly and carefully
move the machine forward until the hopper is properly
positioned to dump debris into the container.
It is unsafe to travel an extended distance with the
hopper raised. Travel only the distance necessary to
position the hopper.
7. Press and hold the left side of the Dump Door Open
switch.
8. After the hopper empties, slowly back the machine away
from the dumpster approximately five (5) feet.
9. Push the lever forward to the LOWER position until the
hopper stops.
CAUTION
WARNING
