Poweramp PowerLift, Owner & User Manual

Page: 6 / 32

4
4111-0078—April 2017
SAFETY
ALWAYS disconnect electrical power source and
ground wire before welding on truck leveler.
DO NOT ground welding equipment to any hydraulic
or electrical components of the truck leveler. Always
ground to the truck leveler frame.
Always post safety warnings and barricade the
work area at truck level and dock level to prevent
unauthorized use of the unit before maintenance
is complete.
Hydraulic and electrical power must be OFF when
servicing the equipment. For maximum protection,
use an OSHA approved locking device to lock
out all power sources. Only the person servicing
the equipment should have the key to unlock the
device.
ALWAYS stand clear of truck leveler when working
in front of or behind the truck leveler.
DO NOT grind or weld if hydraulic fluid or other
flammable liquid is present on the surface to be
ground or welded
DO NOT grind or weld if uncontained hydraulic
fluid or other flammable liquid is present. Stray
sparks can ignite spills or leaks near the work area.
Always clean up the oil leaks and spills before
proceeding with grinding or welding.
Always keep a fire extinguisher of the proper type
nearby when grinding or welding.
Maintenance Safety Precautions
1.50"
3.00"
Decal Size: 1.5 x 3
File Name: 1751-0736 Rev A
Arc Flash and
Shock Hazard
PPE [Personal Protection
Equipment] Required
De-energize equipment before
working on or inside. Do not
open cover without appropriate
PPE. Refer to NFPA 70E for
PPE requirements. This panel
may contain more than one
power source.
Hazardous Voltage
Will Result in Death
or Serious Injury
1751-0736 Rev A