background image

29

4111-0078 — April 2017

NOTE:  Refer to illustration for left/right orientation of 

truck leveler.

 

The model/serial number decal (A) is located 

on the front of the power pack assembly.

When you receive your PowerLift-Series truck leveler, 

write down the truck leveler model and serial number 

in the form provided. This will help ensure safe 

keeping of the numbers in the event the model/serial 

number decal (A) becomes lost or damaged. 

Also, write down Systems, Inc.’s job number, the 

company that installed the truck leveler, and the 

original owner’s name. This will all help to identify the 

specific truck leveler if more information is required.

When ordering, use part numbers and description 

to help identify the item ordered. Do not use “item” 

numbers. These are only for locating the position 

of the parts. Always give truck leveler MODEL 

NUMBER  and/or SERIAL NUMBER.

For service, call or contact:

Systems, Inc.

P.O. Box 309

Germantown, WI 53022
Phone: (800) 643-5424

Fax:  (262) 255-5917

E-mail: [email protected]

Customer Information

MISCELLANEOUS

 

Truck Leveler Information

 

Model ___________________________________

  Serial No. ________________________________

  Systems, Inc., Job No. ______________________

 

Original Owner Information

  Name ___________________________________

  Address _________________________________

     ________________________________

 

Installer Information

  Name ___________________________________

  Address _________________________________

   

      _________________________________

  Date of Installation ________________________

A

Summary of Contents for PowerLift

































Reviews: