background image

2

4111-0078—April 2017

SAFETY

Stay clear of truck leveling device when transport 

vehicle is entering or leaving area.

Do not move or use the truck leveling device if 

anyone is under or in front of it.

Keep hands and feet clear of pinch points. Avoid 

putting any part of your body near moving parts.

Stay clear of truck leveling device when transport 

vehicle is entering or leaving area.

Do not move or use the truck leveling device if 

anyone is under, on or in front of it.

Keep hands and feet clear of pinch points. Avoid 

putting any part of your body near moving parts.

Chock/restrain all transport vehicles, Never 

remove the wheel chocks until loading or 

unloading is finished and transport driver has been 

given permission to drive away.

Do not use a broken or damage truck leveling 

device. Make sure proper service and 

maintenance procedures have been performed 

before using.

Make sure lip overlaps onto transport vehicle bed 

at least 4 in. (102 mm).

Keep a safe distance from both side edges.

Operational Safety Precautions

Operational Safety Precautions

  Learn the safe way to operate this equipment. Read and understand the 

manufacturer’s instructions. If you have any questions, ask your supervisor.

Summary of Contents for PowerLift

































Reviews: