Temperature sensor
Power supply
Balanced inductor
Display board
Panel control board
Electrical wiring diagram
Emitter board
Lighting and
receptor board
Microcomputer master control board
PTC heater
Inductor
Magnetic ring
Motor
Check the malfunction
light
go out
blinking
Fault LED Check items Causes and treatment
Power / abnormal
voltage
Check the power connection and
confirm the voltage normal.
Tamper-proof timer
Sensor fault, continuous operation,
check whether or not the sensor is
blocked.
Installation diagram
WARNING
Do not install the product in a humid place or the place where water could drip onto, such
as outdoors or a bathroom.
Otherwise, a fire, electric shock or product problems could result.
Do not install the product in an area with corrosive or inflammable gas, dust, or salt.
Otherwise, a fire, electric shock or product problems could result.
Do not use the product with any power supply other than specified. Otherwise,a fire could result.
Do not damage power line. Continued use of a unit with a damaged line could cause fire,
eleceric shock, or product problems.
Electric work must be done by qualified personel following.
Technical Standards of Electric Equipment, Indoor wiring requlations, and the Installion Guide.
Improper wiring could cause fire to ignite.
Install an earth leakage circuit breaker to the power supply.
If the earth leakage circuit breaker is not installde, electric shocks could occur if there is a malfunction
or a short circuit.
Use a power line of the rated capacity and connect it securely. An insecure connection may result in fire.
Install the main dryer unit on a flat and vertical wall strong enough to support it securely.
Otherwise, the main dryer unit may fall and result in injury or damage.
Use water-resistant material for nerady walls and floor as small water drops may spread dbout if a user moves
hands violently when drying hands.
Never disassemble, repair or modify the product. Doing so could cause fire or electric shock.
CAUTION
REQUESTS
5