Power One Aurora CCD, Manual

Page: 32 / 82

Page
31
of
80 Instruction Manual for AURORA CDD BCG.00613_AA
Part
3 Mounting and Configuration
Press
ENTER
, and choose whether or not to
enable the DHCP function (Yes / No) and
confirm by pressing
ENTER
.
If the DHCP function is OFF, it is necessary to set up the static IP network address of the CDD to
access the local Web Server.
The set-up is done by accessing the submenu
Web Server IP
(contained in the section
Network).
Step 3
- Set up the WiFi again following the
steps set out in Step 1 and selecting WiFi
running > Yes.
3.4.3 A
UTOCONNECTION
C
ONFIGURATION
The CDD automatically memorizes the parameters of the last connection made (SSID and network
key). Therefore, if the automatic connection function is running, the CDD will automatically connect
to the WiFi network.
To activate/deactivate the automatic connection function, press
ESC
to access the previous level of
the menu and select the item
Autoconnection
using the
UP
and
DOWN
buttons.
Press
ENTER
and then
UP
and
DOWN
to
activate or deactivate the function.
Press
ENTER
to confirm the selection and
ESC
to return to the menu.
The Autoconnect feature enables the CDD to automatically connect to the last
WiFi network that the CDD was connected to. If the last network that the CDD
was configured for is not available, the CDD will not connect to any network.
To configure the CDD for a new WiFi network, disable the Autoconnection
feature and reboot the CDD. This will enable the CDD to search for available
WiFi networks.