Power One Aurora CCD, Manual

Page: 30 / 82

Page
29
of
80 Instruction Manual for AURORA CDD BCG.00613_AA
Part
3 Mounting and Configuration
3.4.1.2
Configuration on Security Protected WPA / WPA2 Networks
Security protected networks will require a security key, or passkey, in order to access the
WiFi network.
•
Secure networks without a MAC address filter
Upon selection of the network (in section 3.4.1
above), you will be prompted to enter the
security key, (passkey), for the secure network.
In order to input the passkey, press the UP or DOWN buttons to scroll the list of characters, (0-
9, A-F), and press ENTER to confirm the character selected. (In order to cancel the last
character input, press ESC.) Press ENTER again to accept the passkey.
Once the security key is input, press
ENTER
twice
to start the connection attempt.
If the key is correct, a completion message
appears on the display after approximately 30
seconds.
At the end of the procedure the message
appears “WiFi Enabled”.
Press
ESC
to exit from the configuration menu.
If the key input is not correct, the display shows the message “wrong password”. Verify the key
and repeat the procedure
.