Power One Aurora CCD, Manual

Page: 10 / 82

Page
9
of
80 Instruction Manual for AURORA CDD BCG.00613_AA
Part
1 Introduction and Safety
1.3.1.2
Assembly Warnings
Prior to installation, inspect the unit to ensure absence of any transport or handling damage, which
could affect insulation integrity. Unauthorized removal of necessary protections, improper use,
incorrect installation and operation may lead to serious safety and shock hazards and/or
equipment damage.
1.3.1.3
Electrical Connection Warnings
Make all electrical connections in accordance with this manual.
1.3.2 A
PPROPRIATE
U
SAGE
CAUTION:
Power-One
accepts no liability for damage of any kind that may arise from incorrect
or careless operation. The equipment must not be used in a ways that do not fall
within the intended field of use.
1.3.2.1
Intended or Allowed Use
This equipment is a device designed to configure and control a network of Power-One equipment,
using radio communication and to supply data relating to the system, via WiFi or an Ethernet port,
to an Internet or local portal for monitoring.
1.3.2.2
Limits of the Field of Use
•
The device cannot be used in environments where there are particular restrictions on the
use of radio waves.
•
The device used to transmit data to the Power-One portal requires a router connected to
Internet (the cost of connection is to be paid by the end user).
•
The device must not be configured to connect to the MICRO Inverter distribution network in
countries that are NOT enabled.
•
The device can be used only if all the technical characteristics are observed.