8699159
4-1/2 in. Metal Cutting Band Saw
V4.1
16
For technical questions call 1-800-665-8685
OPERATION
TO CONVERT THE BAND SAW FOR VERTICAL USE
1. Remove the Locking Pin (#126) from the Body
Frame (#93).
2. Raise the Body Frame to its full vertical position.
Turn the Support Plate (#127) clockwise until it
firmly locks into the Body Frame and insert the
Locking Pin to lock the Body Frame into position
(Fig. 9).
3. Remove the Screw (#142) and Flat Washer (#141) to
open the Blade Back Cover (#82 [Fig. 10])
4. Remove two Screws (#78) and remove the
Horizontal Cutting Guard (#71 [Fig. 11]).
5. Close the Blade Back Cover and secure with the
Screw and Flat Washer.
6. Guide the Saw Blade through the slot in the Vertical
Cutting Table (#134), and secure the Vertical Cutting
Table in position with the two Screws (#78 [Fig. 12]).
7. Mount the Vertical Cutting Table Support
(#136 [Fig. 13]).
a. Insert one Screw (#135) downward through
the mounting hole in the Vertical Cutting Table.
b. Attach the top section of the Vertical Cutting
Table Support (#136) to the Vertical Cutting Table
using one Flat Washer (#8) and one Nut (#6).
c. Loosen the Bolt on the Body Frame (Fig. 13-1).
d. Position the Vertical Cutting Table Support
between the Body Frame and the head of
the Bolt.
e. Firmly retighten the Bolt.
Fig. 9
Fig. 10
Fig. 11
Fig. 12
13-1
Fig. 13
