5
UNASSEMBLED P
ARTS
(2) K
e
y
s
Slope Sheet
Key
(1) O
i
l D
rain
Tu
be
ASSEMBL
Y
When right or left hand is mentioned in this man ual, it means
when you are in the operating po si tion (seated be
hind the
steer ing wheel).
TO REMOVE TRACTOR FROM
CAR TON
UNPACK CARTON
•
Remove all accessible loose parts and parts cartons
from carton.
•
Cut along dashed lines on all four panels of carton.
Remove end panels and lay side panels flat.
•
Check for any additional loose parts or cartons and
remove.
Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping
puposes.
FIG. 1
02931
CHECK BATTERY (See Fig. 1)
•
Lift hood to raised position.
NOTE:
If this battery is put into service after month and year
indicated on label (L) (label is located between terminals)
charge battery for minimum of one hour at 6-10 amps.
(See "BATTERY" in Maintenance section of this manual
for charging instructions).
L
FIG. 2
ADJUST SEAT (See Fig. 2)
•
Sit in seat.
•
Lift up adjustment lever (A) and slide seat until a com-
fortable position is reached which allows you to press
clutch/brake pedal all the way down.
•
Release lever to lock seat in position.
NOTE:
You may now roll or drive your tractor off the skid.
Follow the ap
pro pri
ate instruction below to remove the
tractor from the skid.
W
arning: Before start ing, read, un
der -
stand and fol low all in
struc tions in the
Op er
a tion section of this man
u al. Be
sure tractor is in a well-ventilated area.
Be sure the area in front of tractor is
clear of other peo ple and objects.
TO ROLL TRACTOR OFF SKID (See Op-
er
a tion section for location and function of
con trols)
•
Raise attachment lift lever to its highest po si tion.
•
Release parking brake by de press
ing clutch/brake
ped al.
A
Summary of Contents for 418774
Page 28: ...28 SERVICE NOTES ...
Page 33: ...28 SERVICE NOTES ...
