- 10 -
0700_GB-EINsATz_9762
use
GB
1. Check for proper attachment.
Before initial operation check all screws for tightness and retighten
if necessary.
2. Set required working depth.
Position both the support arms with pins (6) accordingly.
3. Swing hollow discs (left and right) into working position
(A)
Make sure pins (7) are inserted accordingly
4. Lower implement to the ground using tractor’s lifting
gear.
Drive a few metres into the working area then check the working
depth and the closing of the tine furrows.
5. if necessary, adapt tine angle to the operating conditions
(Sk, EX).
Pos. B:
Swivel the tines back (pos. B) if the required working
depth is not being obtained, e.g. with very heavy
ground.
Pos. n:
Normal tine position.
SK
B
N
344-05-11
TD 34/95/20
5
2/3
1/3
Starting work
Basic setting for hollow discs: 1/3 of the total working depth.
O: upper pins
To secure the trailer
u: Lower pins
For setting the working depth
Working depth difference from hole to hole of approx. 1.5 cm
Always change both pins!