- 62 -
0800_GB-Wartung_1602
GB
MainTenance
Adjusting measurement for end switch
The adjustment is made with tailgate closed as well as with cutter bar swivelled in.
End switch for tailgate:
X = 6 mm
End switch for automatic loader (up):
X = 5 mm
End switch for cutting unit:
X = 6 mm
End switch for scraper floor:
X = 6 mm
(with regulating fittings)
R.p.m sensor (Hall sensor)
- 5 mm
Changing the filter
The red tip (50) indicates that the oil filter (F) is soiled.
The distance to which the tip is pushed out dependsd
on how soiled the filter is. When the tip shows maximum
soiling, the filter (F) is to be changed.
- Change hydraulic oil in accordance with tractor‘s
operating manual.
F
50
TD57/91/67
Oil pressure switch
Adjustment of oil pressure switch (): 220-20 bar
(Setting value depends on tractor hydraulics)
Setting procedure:
1. Carry out base setting according to scale (220-20
bar)
2. Load until silage pushes tailgate open approx. 2 –
cm
. When scraper floor is running, screw regulator (R)
out until wagon “FULL” indicator appears.
Note!
An exact setting can only be carried out using
a manometer
220 - 230 bar
