- 27 -
0601-GB-DIREct-contRoL_563
GB
Note:
Operation is divided
into loading
and unloading
functions.
The red symbols
with the red LED
are allocated
to the loading
functions.
The green symbols
with the green
LED are allocated
to the unloading
functions.
The black symbols
are available for
both operation
modes
Meaning of control panel buttons
1 Raising pivoting drawbar
Raise forage top frame
2 Lower pivoting drawbar
Lower forage top frame
Swing cutting unit in
Reduce scraper floor unloading speed
4 Swing cutting unit out
Scraper floor forward run
5 Raising pick-up
Open tailgate (with dosing roller on)
6 Lower pick-up
Close tailgate (with dosing roller off)
7 Scraper floor back run (= touch function)
Increase scraper floor unloading speed
8 ON/OFF button
- Change to other operation mode (red/green)
- STOP button
"DIRECT CONTROL" operating unit
1
2
4
5
6
7
8
Switching on operating device
Press the I/O key for a few seconds
- the integrated control lamp glows red
Loading functions
(= red symbols)
- Loading functions are always activated after switching
on
- The LED in the I/O key glows red
- Only the red symbol functions are active
- The required hydraulic function is carried by pressing
the appropriate key
- the (LED) in the selected key glows red
Unloading functions
(= green symbols)
- The LED in the I/O key glows green
- Only the green symbol functions are active
- The required hydraulic function is carried by pressing
the appropriate key
- the (LED) in the selected key glows green
The pivoting drawbar (= black symbols) can
be actuated in both levels
Should the forage top frame be adjusted, the
operating device must be changed also
(see key description “Pivoting drawbar /
Forage top frame”)
Control light (LED)
If one of the control lights (LEDs) lights up, it means that
that particular function has been activated.
The example on the illustration above shows
- The top left integrated control light (LED) is on
- The function “raise pivoting drawbar” is carried
out.
Carry out required hydraulic function
Change to other operation mode
Briefly press button I/O
- the (LED) changes to green
DirecT conTrol - oPeraTion
