- 5 -
0800_GB-Wartung_1602
GB
MainTenance
Transmission
Change or at least top-up transmission oil once a year.
Fill in oil acording to lubrication chart.
Topping-up oil
- To pour in oil unscrew the filler screw (6).
- Check oil level at the level screw (7).
Changing oil
- Open oil outlet screw (5).
- Drain old oil and dispose of as allowed by law.
Regulating gears:
1,0 Liter SAE 90
Starting transmission:
,0 Liter HD 85W-90
Lateral gears:
1,0 Liter SAE 90
Scraper floor-gears:
1,5 Liter SAE 90
Chains
Scraper floor chains
The four scraper floor chains must be tensioned
simultaneously but not strained. They should sag
slightly.
Retensioning of scraper floor chains
- The tensioning screw (S) is located under the
platform.
If length of tensioning screw is no longer adequate,
then remove chain links.
- Always remove even numbered links (2, 4, ...) from all
four chains.
S
S
S
S
TD 57/91/49
Drive chains for regulating rollers
- Oil chain and check chain tension every 40 runs.
- Regulation of the drive chain tension takes place through
the tensioning screw (58) after loosening counter-lock
nut and lock nut (57).
- Tighten lock nut and counter-lock nut after tensioning
chain.
Note!
Retension scraper
floor chains with
hydraulic lines
connected.
