- 2 -
0701_GB-Power-control_5543
GB
PoWer conTrol - oPeraTion
6. Trailing forward axle
Press button
- trailing forward axle is switched on or off
- status (open or closed) shows on the display
Attention! During the hydraulic forward
axle locking and opening function, the key-
board is briefly locked for other hydraulic
functions.
Safety advice! Before road transport check
the automatic trailing forward axle function
(brief reverse travel – forward axle must
be locked)
Attention!
The trailing forward axle must be locked:
- when travelling straight ahead quickly at
30 km/h or more
- with unpaved surfaces
- in sloped areas
- with load on the front axle through pivoting
drawbar usage
- when travelling over a drive-in silo
- when lateral traction of the unguided axle
is no longer sufficient
4. Regulating rollers
Briefly press button
- regulating rollers are switched on or off
- indicator on display when rollers are switched on
Note!
Regulating rollers can only engage when
tailgate is open.
If the regulating rollers are started when the
p.t.o. is turned off, the warning indicator
“PTO” appears for 5 seconds and a warning
signal sounds for 2 seconds.
5. Cross conveyor belt
Briefly press button
- within 5 secs. thereafter, press the direction button
"Right" oder "Left"
- Indication on display
Press button once again
- cross conveyor belt stops again
Automatic unloading function combined with cross con-
veyor belt can be carried out as follows:
- start automatic unloader with button
- check the status
- If cross conveyor belt is running, the open
tailgate function is bypassed
- If cross conveyor belt is still, then tailgate
must be opened first
Button order
- Cross conveyor belt button
- "Right" oder "Left" button
Note!
The direction choice remains stored until
the next direction change and can be
skipped when running direction remains
constant.
- Automatic unloader button
Cross conveyor belt can only be started when
the tailgate is open.
