manualshive.com logo in svg

Pottinger FARO 3500 L/D, Operator'S Manual

The Pottinger FARO 3500 L/D Operator's Manual is a comprehensive guide that provides detailed instructions for operating and maintaining the product. This essential manual is available for free download at manualshive.com, ensuring easy access to the information needed to maximize the performance and longevity of your machine.

Share
Download
background image

Dokument

 

D

GB-0600 Dokum D Anhänger

-  

ALOIS PÖTTINGER Maschinenfabrik GmbH
A-4710 Grieskirchen
Tel. (07248) 600 -0
Telefax (07248) 600-511
GEBR. PÖTTINGER GMBH
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-111 / 112
Telefax (0 81 91) 92 99-188

GEBR. PÖTTINGER GMBH
Servicezentrum
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-10 / 21
Telefax (0 81 91) 59 656

 

Machine checked according to delivery note. All 
attached parts removed. All safety equipment, drive 
shaft and operating devices at hand. 

 

Operation and maintenance of machine and/or 
implement according to operating instructions 
explained to the customer. 

 

Tyres checked re. correct pressure. 

 

Wheel nuts checked re. tightness. 

 

Drive shaft cut to correct lenght.

 

Correct power-take-off speed indicated. 

 

Mechanical functions (opening of rear gate, pivoting 
of cutting mechanism out/in, etc.) demonstrated and  
explained. 

 

Removing and mounting of knives explained. 

 

Electrical connection to tractor established and 
checked re. correct supply (54 g connected). Note 
references in operating manual. 

 

Fitting to tractor carried out: hight of drawbar 
adjusted, brake cable installed, hand brake lever 
assembled in tractor cabin. 

Please check. 

     

X

According to the product liability please check the above mentioned items. 

INSTRUCTIONS FOR 
PRODUCT DELIVERY

GB

 

Function of electrical installation checked and 
explained. 

 

Hydraulic connection to tractor established and 
checked re. correct supply. 

 

Hydraulic functions (drawbar, opening of rear gate, etc.) 
demonstrated and explained. 

 

Handbrake and operating brake tested re. function. 

 

Trial run carried out and no defects found. 

 

Functions explained during trial run. 

 

Automatic on/off switch of loading mechanism 
checked. 

 

Pivoting in transporting and operating position 
explained. 

 

Information given re. optional extras. 

 

Absolute need to read the operating manual indicated. 

In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.

For this purpose please do the following:
- 

sign the 

document A

 and send it to the company Pöttinger

 

(in case of Landsberg equipment: to the company Landsberg)

- 

document B

 stays with the specialist factory delivering the machine.

-

 

document C

 stays with the customer.

Summary of Contents for FARO 3500 L/D




































































































Reviews:

No comments

Related manuals for FARO 3500 L/D

Landoll 7812 Operator And Parts Manual preview
7812
Brand: Landoll Pages: 52
Gason 7390 Operator'S Manual preview
7390
Brand: Gason Pages: 110
Gainsborough K900 Instructions For Use preview
K900
Brand: Gainsborough Pages: 2
Raymarine RS232 Owner'S Handbook Manual preview
RS232
Brand: Raymarine Pages: 24
Hansen P4 Installation Manual preview
P4
Brand: Hansen Pages: 72
Quadro mdb Evolution Construction Manual preview
Evolution
Brand: Quadro mdb Pages: 4
AAT SOLO Original User Manual preview
SOLO
Brand: AAT Pages: 16
AAT S-max Translation Of The Original User Manual preview
S-max
Brand: AAT Pages: 40
Dairy Tech Platinum Series Operator'S Manual preview
Platinum Series
Brand: Dairy Tech Pages: 38
H&S M6 Parts List And Operator'S Instructions preview
M6
Brand: H&S Pages: 34
QAL Medical 480 Service And Technical Manual preview
480
Brand: QAL Medical Pages: 42
iFIT TT200 Patient User Manual preview
TT200
Brand: iFIT Pages: 11
MacDon FlexDraper FD2 Series Quick Start Manual preview
FlexDraper FD2 Series
Brand: MacDon Pages: 2
M-Audio OXYGEN PRO MINI Quick Start Manual preview
OXYGEN PRO MINI
Brand: M-Audio Pages: 56
NanoVibronix UROSHIELD Quick Manual preview
UROSHIELD
Brand: NanoVibronix Pages: 2
NanoVibronix PainShield User Manual preview
PainShield
Brand: NanoVibronix Pages: 32
Nanoleaf Shapes Hexagons User Manual preview
Shapes Hexagons
Brand: Nanoleaf Pages: 27
V.ORLANDI RP10 Installation, Operating And Maintenance Instructions preview
RP10
Brand: V.ORLANDI Pages: 144

Brands by name

Popular brands

Load more brands