Device is not connected properly
Restart drone and remote control.
Cannot unlock
Check if the drone is geomagnetic calibrated.
Cannot find GPS signal or GPS level drops
Check the surrounding environment of the
drone to see if there is high-frequency signal
interference.
The drone cannot return to home
Make sure there are no less than 6 GPS signal
show up on the App before take-off.
The drone jitters or video jitters
Can't take photos or record videos
a. Check if the propeller and motor shaft of
the drone are deformed or cracked, if yes,
please replace;
b. Check if screws are fixed in place after
disassembly.
a. Check if the drone is inserted with a Micro SD
card.
b. Check if Micro SD card format is correct.
c. Check if Micro SD card is full.
Problem
Solution
21
2. Frequent Q&A
3. Safety Precautions
Keep away from people when flying the remote-controlled drone. Improper assembly or damage to
the body, poor electronic control, and unfamiliar operation may lead to unpredictable accidents such
as drone damage or personal injury. Operators should pay attention to flight safety, and understand
responsibilities caused by negligence.
1. Keep away from obstacles and people
The remote controlled drone is uncertain in flight speed and state during fly, which poses potential
danger. It shall be far away from people, high-rise buildings, high-voltage wires, etc. during fly, and
avoid flying in the bad weather such as wind and rain, thunder and lightning, to ensure safety of
operator / surrounding people and property.
2. Keep away from humid environment
The interior of the drone is composed of many precise electronic components and mechanical parts.
Therefore, it is necessary to protect the drone from humidity or prevent water entering the body, to
avoid accidents caused by the failure of mechanical and electronic components.
Summary of Contents for Dreamer Pro
Page 28: ......
