18
4. Geomagnetic Calibration
Step 1:
Enter the PotensicPro App setting interface, click the second column, and select geomagnetic
calibration in thelist, then click"Star Calibration" on the right side. The left front light flashes
green and the left rear light flashes red indicate that it's ready for calibration.
Step 2:
Rotate the drone 720° horizontally, than the right front light flashes green and right rear light
flashes red. (Picture 1)
Step 3:
Rotate the drone 720° vertically with camera upwards. The four indicator light are solid on(the
2 front lights are green while the rear lights are red), and calibration is completed. (Picture 2)
If no less than 6 satellites are searched by the drone, the 2 front lights are stably on, and the 2
rear lights flash slowly. Then, the drone can take off.
Picture
1
Picture
2
(1)
(2)
(3)
Geomagnetic calibration is required for the first flight (after once calibration, the same region within
300km doesn't need calibration). If the geomagnetism of the aircraft is disturbed, the manual
re-calibration may need to done to the drone.
Note:
If the left front light flashes green and the left rear light flashes red slowly, it indicates that
calibration fails. It is recommended to recalibrate geomagnetic after changing the take-off location
.
Summary of Contents for Dreamer Pro
Page 28: ......
