13
Picture 1
Camera and Gimbal
3. Remote Control Frequency Linking
If you replace the remote control, it is necessary to follow the below steps to re-connect the new
remote control and the drone.
1.Install the drone battery; short press the power button once, then quickly long press it for 7s, the
drone 2 front LED foot lights and 2 rear lights start quick flashing alternately;
2.Press down the remote controller’s right joystick and power button for 2s, then the remote controller
emit 2 beep sounds, and its power indicator is quickly flashing.
3.Then the remote controller and the drone enters auto linking status, please wait about 30s, the
remote controller will emit one beep sound and its power indicator is stably on, the drone 4 foot lights
are quickly flashing, 10s later, the 4 foot lights keep stable bright, which means the frequency linking
is completed.
1. Camera Overview
The Dreamer Pro adopts a 1/3-inch CMOS Sony sensor with 16MP camera. Equipped with low
distortion wide-angle lens. The blue glass filter can effectively improve the picture quality. Standard UV
lens to protect the lens. When recording video, Dreamer Pro supports 4K ultra-high-definition video
recording at up to 30 frames per second, providing 4 times the full HD resolution of image details.
Support MPEG-4 AVC (H.264) format, and can achieve high-quality video recording with a high bit rate
of 60Mbps.
Summary of Contents for Dreamer Pro
Page 28: ......
