Potensic D58, Operation Guidance

Page: 9 / 24

8
Landing gear install and disassemb
As the diagram shows, aim the landing gear pillar to the body hole and press
down, then tighten the screws on the landing gear. When disassembling, loose
the screws and pull out the landing gear(Picture 4).
Note: Make the landing gear close to the drone level,otherwise it will be
unstable and affect the stability of the drone.
Picture 4
Propeller install and disassembly
Notice: When installing, please make sure the right installation, or the drone
can not fly normally.
Picture 5
1. Use the screw driver counter-clockwise to off the screw and then lift out
the damaged propeller (picture 5).
2. Replace with the same new rotating direction propeller, aim at the screw hole to
install it, then tighten the screw in clockwise.
http://www.ipotensic.com