12
Picture 19
Horizontal Calibration
Picture 20
Vertical Calibration
Compass Calibration
Horizontally rotating the drone( picture 19), until the transmitter sounds long
“ di...” , and it shows the horizontal calibration is finished. Left navigation LED gets
a solid light and right navigation LED flashes, it enters to vertical calibration status.
Vertically rotating the drone (picture 20), until the transmitter sounds long
“ di...” , it shows vertical calibration is finished, and the four navigation LED will
flash and rotate.
Tips: It’s a must to have the compass calibration first each time you start the
drone, otherwise the drone can not fly normally.
GPS Signal search
After successfully frequency pairing, the drone enters to search GPS signal
automatically.
When the left blue indicator of transmitter turns from flash to solid bright, it
indicates GPS signal connection is successfully finished. If not, the drone can’t
fly up.
GPS defaults to be on.
Turn off:
Click the key, the transmitter will make the sound of “di”, the blue indicator of the
transmitter is off to indicate that the function of GPS is off.
(The function is suitable for using in the situation of weak GPS signal or indoors;
When the GPS function is off, the fixed point function can not work either.)
Turn on:
Repeat above action after five seconds,
you can restart the GPS function.
Turn on / turn off GPS signal
* The function can only be used
when the motor is locked.
http://www.ipotensic.com
Summary of Contents for D58
Page 2: ......
Page 24: ...http www ipotensic com...
