Potensic D58, Operation Guidance

Page: 10 / 24

9
Warning: Please take care and do not to damage the LED board when
taking out the motor.
Diagram of motor replacement
Notice: Please make sure the motor you install is the same rotating direction
as the original one. Otherwise, your drone will not fly normally.
Suggestions for motor using:
It’s normal that after using for a period of time, the motor performance will
decrease, so please purchase a new one for replacement.
Picture 6
1. Remove the screw and the lampshade with a screwdriver counter-clockwise,
and remove the damaged motor after disconnect the motor terminator.
2. Replace with the same new motor, connect the motor wire, put on the
lampshade, then tighten the screws in clockwise.
http://www.ipotensic.com