background image

17

Click this button,then it will sound “ di”, it means low speed mode “L”; when it 
sounds “ di.di”,means medium speed “M”; and sounds “ di.di.di” means high 
speed mode “H”.

1. Low Speed Mode is suitable for beginner.

High / Medium/Low Speed Mode Switch

Low Speed Mode(Mode L)

2. Medium Speed Mode is suitable for skillful 
    pilots to play in the gentle breeze. 

Medium speed Mode(Mode M)

3. High Speed Mode is suitable for expert to 
    experience aerial stunt in outdoor.

High Speed Mode(Mode H)

Low Battery Alarm

When the transmitter is in low battery, it will make the sound of ” di...di...di...” 
constantly to alarm you, now you should land the drone as soon as possible to 
replace the battery.

Notice: After low-battery alarm, the drone will return home and its controllable
            range will be within 20 meters radius.

While flying, in case that the battery of the drone is low, it will make the sound of 
“di”..“di” .. to alarm you, the drone's indicator lights will change from solid bright 
to flash. After alarm, the drone automatically returned to the take-off point.

Out of Range Alarm

When the drone flying out of the max remote control distance, the transmitter will 
beep “didi...didi...didi...” to alarm the user to fly back the drone within range 
immediately.

Out of Control Protection

Out of control protection refers to the flight control system automatically controls 
the drone to fly back to the return point after receiving the remote control signal 
(ie, out of control), and function of landing, which can reduce the loss or fall of 
the drone.
The drone does not have the function of avoiding obstacles during the 
uncontrolled return flight. The user can set the return altitude value to avoid 
obstacles on the way back.

http://www.ipotensic.com

Summary of Contents for D58

























Reviews: