11
Check List Before Flight
1) Make sure the drone and transmitter battery are fully charged.
2) Make sure the Throttle Stick of the transmitter in the middle position.
3) Please strictly obey the order of turn on and turn off before operation. Turn on
the transmitter power first and then turn on the drone power before flying; turn
off the drone power first and then turn off the transmitter power when finish
flying. Improper turn on and turn off order may cause the drone out of control
and threaten people’s safety. Please cultivate a correct habit of turn on/off.
4) Make sure the connection is solid between battery and motor etc. The ongoing
vibration may cause bad connection of power terminal make the drone out of
control.
5) Improper operation may cause drone crash, which may arouse motor
defective and noise, and then effect the flying status or even stop flying.
Please go to the local distributor to buy new parts for replacement so that the
drone can return to its best status.
Flight steps
It must be placed on the horizontal ground!
Frequency pairing
Power on the transmitter
Pull the left stick to the lowest position and
let go, the indication light becomes slowly
flashing. It indicates the transmitter enters
the frequency pairing status.
Hold power button for two seconds to start the drone, when frequency paired
successfully, then the left navigation light keeps flashing, while the right
navigation light is off. Thus can it enters the state of compass level
calibration.
http://www.ipotensic.com
Summary of Contents for D58
Page 2: ......
Page 24: ...http www ipotensic com...
