PostProcess Technologies, Inc. • www.postprocess.com • REV A | page 43
6. Appendix A
The next configuration screen contains the settings for the system motion control.
The
Minimum Auto Motion Travel
setting is used to configure the minimum travel required when using
boundary control.
The next configuration screen contains the settings for calibration of the pH sensor.
The
pH Filter Weight
controls how quickly the pH value reacts to changes. The higher the number the quicker the
the value reacts to changes.
The
pH Zero Adjust
changes the calculation used to determine the pH value by adding this number to the
result.
The
pH Span Adjust
changes the calculation used to determine the pH value by increasing or decreasing the
range value used.
