POSline ITT4300 Label Printer
6
Data format:
always 8 data bits, 1 start bit and 1 stop bit.
Parity:
always non parity
Handshaking:
XON/ XOFF as well as CTS/ RTS (hardware flow
control).
If you run an application with the bundled printer driver under
Windows and use the serial port, you should check the above
parameters and set the flow control to “Xon/ Xoff” or “hardware”.
Parallel (Centronics)
The parallel port is a standard 36- pin Centronics. Its pin assignments
are listed as following.
Pin
Direction
Definition
Pin
Direction
Definition
1
In
/STROBE
13
Out
SELECT
2
In
Data 1
14, 15
NC
3
In
Data 2
16
~
Ground
4
In
Data 3
17
~
Ground
5
In
Data 4
18
NC
6
In
Data 5
19~30
~
Ground
7
In
Data 6
31
NC
8
In
Data 7
32
Out
/Fault
9
In
Data 8
33~36
~
NC
10
Out
/ACK
11
Out
BUSY
12
Out
PE
Auto Polling
Both the serial and parallel ports are active at the same time on this
printer, i.e. data can be received on either one, however no provision
is made for port contention. If data is transmitted to both ports
simultaneously, it will cause the data in the received buffer to be
corrupted.
Summary of Contents for ITT4300
