POSline ITT4300, Manual

Page: 20 / 46

POSline ITT4300 Label Printer
6
Performing Calibration
After the media and label are loaded, it is necessary to do the
calibration for the label sensor.
1. Press and hold the PAUSE button.
2. Turn on the power.
3. The printer will feed the labels for 12 inches.
4. Finally the “READY” message is displayed, the READY and MEDIA
indicators stop blinking and remain illuminated.
Note:
This procedure is very important and must always be carried out after
installation and every time the media type is changed. Failure to do so
will result in the gap and label-empty detection being incorrect.