POSline ITT4300, Manual

Page: 39 / 46

POSline ITT4300 Label Printer
6
Caring for your Printer
Before maintenance be sure to turn off the printer power.
1. Cleaning the print head( TPH)
Turn off the printer, open the cover, print head module and remove
the ribbon. Rub the print head with a piece of cotton which has been
moistened with alcohol. Check for any traces of black coloring or
adhesive on the cotton after cleaning. Repeat if necessary until the
cotton is clean after it is passed over the head.
Note :
The print head should be cleaned at least every time the ribbon is
replaced and more often depending on actual usage and conditions.
2. Cleaning the roller
Using a cotton moistened with alcohol, clean the roll and rip off the
attached glue.
Note :
The roller should be cleaned whenever it has been in contact with
foreign materials such as dust or adhesives.
3. Cleaning the media compartment
Clean the media compartment with cotton which has been moistened
with a mild detergent. Every time a media roll is printed this
compartment should be cleaned to reduce the incidence dust.