POSline ITT4300, Manual

Page: 38 / 46

POSline ITT4300 Label Printer
6
. Adjust the Darkness (heat temperature).
. Slow down the print speed.
. Refer to the following paragraphs and clear the related modules.
Recovery
In order to continue your print jobs after any abnormal conditions have
been recovered, simply press the CANCEL button or restart the
printer. Make sure that the LED indicator is illuminated and not
blinking and remember to resend your files.
Addendum
If you use small labels ( label height is less than 30 mm ) and the area
near top is unprintable you can adjust the top margin slightly by the
following procedure.
1. Hold FEED ( or PAUSE ) button and count the blink times for
READY LED. Each blink stands for 1 pixel.
2. Release the button.
3. Restart the printer.
4. Send data to printer to print again.
5. Check the print position.
If you make calibration again the slight adjustment will be reset.