POSline ITT4300, Manual

Page: 21 / 46

POSline ITT4300 Label Printer
6
Printing Configuration Report
Performing the Self Test
1. Turn off the printer. Press and hold the FEED button.
2. Turn on the power.
3. When the message “SELF TESTING …” is displayed on the LCD
and READY indicator blinks, release the button.
4. The printer will print out a configuration report.
5. Finally the “READY” message is displayed and the READY
indicator stops blinking and lights up.
6. The following information will be printed on this report.
- Font list
- DIP switch settings
- Hardware configuration and status
- Label parameters
- Firmware version
Note:
After self test the printer will enter character dump mode. For normal
operation press the CANCEL button to stop dump mode.