POSIFLEX XT-2614E, User Manual

Page: 8 / 12

3.
Pull outwards the locking levers with your
forefingers and then remove the neck cover
in the direction shown by the arrow.
4. Place the terminal with the rear facing
towards you. After tilting the screen to the
horizontal positon, route the cable along the
cable passage and through the cable exit.
5. Tilt the terminal up enough to have the
bottom I/O plate towards you. Properly
insert the cable into the correct port on the
bottom I/O plate.
6. Have the screen tilt all the way down, and
then push the neck cover back into place.
7. Place the cable cover back.
Installing Side Mount Upgrade Kits
XT-2614E/2614Q is an expandable model which
enables you to upgrade its own capacity by
additionally installing side mount upgrade kits,
such as magnetic stripe reader. After unscrewing
two fixing screws at the left side on the back of
your LCD panel, side mount compartment could
be found to install your side-mounted peripherals.
For detailed installation instructions, please refer
to the user manual specific to the device which
you intend to mount onto the terminal.
Cable Exit
8