POSIFLEX XT-2614E, User Manual

Page: 9 / 12

Powering ON/OFF the XT-2614E/2614Q
Power ON the XT-2614E/2614Q
To power on the POS press down the power button
for at least 3 seconds. It takes around 21 seconds to
load an operating system on your terminal. In the
case that XT-2614Q is connected to the second
display, you have to wait at least 30 seconds to
initiate the monitor after the terminal completely
boots into the operating system.
Power OFF the XT-2614E/2614Q
In most cases, you are advised to follow the below steps to power off your
system.
1.
Press down the power button for a few seconds until a pop-up window
appears as shown in the figure.
2. Tap
Power Off
on the screen and then
OK
to shut down your system.
If the terminal fails to turn off the machine for unknown reasons,
please be advised to hold the power button more than 10 seconds to
force a shutdown of the system. However, once the system is switched
off, you are suggested to wait another 20 seconds before rebooting
your machine.
Status LED Indicator
LED status indicator, which is located at the bottom edge of the LCD panel, is
mainly responsible for notifying users of the current system status by emitting
various LED signals. In the chart provided below, it describes all the possible
LED status as a quick reference.
LED System status Description
Power LED Solid blue System ON
Solid yellow System Standby
Power Button
9