Positioning your POS for a Perfect Viewing Angle
The adjustable Gen 7 base stand designed for XT-2614E/2614Q allows you to
determine an ideal position for your terminal using its unique tilt adjustment
mechanism. As the below figures show, Gen 7 base basically provides three
standard positioning solutions for your terminal: flat folded mode, low profile
mode, and full extended mode.
XT-2614E/2614Q with Gen 7 Base Stand
Flat folded mode
Low profile mode
Full extended mode
In general, your POS system will be set up beforehand in flat folded mode and
then packaged into the box for shipping. After it is unpacked, you may re-
adjust the terminal in either low profile mode or full extended mode according
to your situation. Below will provide instructions on how to adjust an ideal
angle for your POS system with Gen 7 base stand. As a reminder, please be
careful not to touch the LCD panel while setting up the tilt angle
XT-2614E/2614Q with Gen 7 Base Stand
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-2614E/2614Q with
Gen 7 base stand. And, XT-2614Q will be used in the following demonstration.
1.
Unpack XT-2614E/2614Q, which is supposed
to be set in flat folded mode, out of the
package box and then lay your POS system on
a flat surface.
2.
Steady the base stand with one hand, and then
tilt the screen downwards.
4
Summary of Contents for XT-2614E
Page 12: ...MEMO 12...
