![background image](http://html1.mh-extra.com/html/magtek/ipad-pin-pad/ipad-pin-pad_installation-instructions_3670104001.webp)
7/18/2014
Specialized Business Solutions
Page 1
MagTek IPAD PIN Pad & MagTek IPAD SC Signature Capture w/ PIN Pad
Installation Instructions for the MagTek IPAD or IPAD SC Signature Capture Device
Hardware: MAGTEK IPAD PIN PAD or SIGNATURE CAPTURE/PIN PAD device.
USB Driver: Included with the installation of keystroke 7.01 and higher.
Keystroke Payment Server: KeyPay.exe ("Install Other Software" on the CD)
Keystroke Software: Keystroke POS - v7.01 or later.
Connecting the device to the Computer - USB Cable Setup
Plug in the device and let Windows install the driver. You may see Windows display a message that "your device is
installed and now ready to use".
Setup the PIN Pad Hardware in Keystroke POS:
-
In Configuration Manager, under Hardware - PIN Pad
-
Under PIN Pad Type, select MagTek IPAD
-
Port will be greyed out and is not a selectable button
-
Select Test Device. Follow the prompts.
Setup the Signature Capture (for IPAD SC Models only) in Keystroke POS
-
In Configuration Manager, under Hardware - Signature Capture
-
Under Sig Cap Type, select MagTek IPAD SC
-
Port will be greyed out and is not a selectable button
-
Select Test Device. Follow the prompts.
Setup an Authorization Method for Credit Card payments that use the mag-stripe reader
-
In Configuration Manager, under Tables - Authorization Methods
-
Select the KPCredit Authorization Method
-
Verify the Type is set to Credit Card
-
Leave the other fields blank
-
Usually turn on Verify Address, Verify Zip, CVV2, and Manually Entered Only
-
Ok Amount can be on or off
-
Capture Signature should be ON (for Credit Cards)
-
Under Card Reader, select PIN Pad-Card Swipe only (Credit Cards)
-
Select Ok to Save
Setup an Authorization Method for payments that use the PIN Pad & Mag-Stripe
-
In Configuration Manager, under Tables - Authorization Methods
-
Select Add New Method
-
Enter a File Name: Enter a name (KPDEBIT)
-
Select the Type: Keystroke Payment Module
-
Select OK
-
Set the Type: Debit(ATM)
-
Capture Signature should be OFF (for Debit Cards as it is not required)
-
Under Card Reader, select PIN Pad-DUKPT Encryption (Debit/ATM Cards)
-
Select Ok to Save
Setup Payment Types to use the corresponding Authorization Method (shown above).
-
In Configuration Manager, under Tables – Sales Payment Types
-
Select a Payment Type, and change it to the appropriate Auth Method created above
-
Select Ok to Save