POSIFLEX HS-6510W User Manual Download

Page: 19 / 20

Adjusting LCD Monitor for a Better Viewing Angle

For an optimal viewing angle, please tilt the LCD monitor up and down in the

directions shown by the arrow in the below figure. Please be advised not to

touch LCD panel while setting up the tilt angle for

HS-6510W/6512W/6514W.

Specifications

HS-6510W

HS-6512W

HS-6514W

CPU

Intel Skylake-U CPU:
Core i3-6100U

Memory 1 x DDR4 SO-DIMM, 4G by default

Storage Device 1 x SATA connector ( for 2.5" HDD or SSD)

Power Supply 24V/100W

Display 9.7” 1024 x 768

LCD Panel

12.1'' 1024 x 768

LCD panel

14'' 1366 x 768

LCD panel

Operating System Windows 7/ POSReady 7/ Windows 8.1/ Windows 10 IoT

Touch Screen Bezel-free P-CAP touch

Serial Port 2 x DB9 Port (on bottom I/O plate)

1 x RJ50 Port (on the top I/O plate)

Parallel Port 1

CR Port 1 Port controlling 2 CR

VGA Port D-SUB 15-pin , with 12V power for Posiflex LCD

monitors

Standard USB Port 4 x USB 2.0 ports (one on the top I/O plate and the other

three on the bottom I/O plate)

Audio Port 1, Line Out

DC-In Jack 1 x DC-in Jack (3-pin)

Summary of Contents for HS-6510W





















Search results

Summary of Contents for HS-6510W

Reviews:

Related manuals for HS-6510W

Brands by name

Popular brands

POSIFLEX HS-6510W, User Manual

Search results

Summary of Contents for HS-6510W

Reviews:

Related manuals for HS-6510W

Brands by name

Popular brands