2.
After placing the mounting bracket in your
preferred mounting position, use the screw
holes of the mounting bracket to drill two
holes on the surface. Each hole has to be at
least
4
1
” or 6.25 mm diameter and
8
3
1
” or
35mm in depth.
3.
Insert two plastic anchors into the holes you
drilled in step 2 and use a hammer to tap the
plastic anchors into the drilled holes.
4.
After well attaching two screw holes of the mounting bracket to the
plastic anchors, insert two self-tapping screws into the plastic anchors
through the mounting bracket and then secure the bracket.
5.
Support your POS terminal with its screen
facing towards you. Then, align the two
screw bolts on the bottom of the POS with
the rail slots of the mounting bracket.
6.
Push the POS backward along the rail slots of the bracket until the
terminal is locked into place.
13
