POSEIDON XSTREAM, User Manual

Page: 14 / 29

:: 14 XSTREAM
USER MANUAL :: ENGLISH
HOW
TO
USE
USAGE
First time mounting the hose of the length you have cho-
sen, start with unscrewing the blind-screw (5mm allen-key)
where you want the 2nd stage. Be careful not to contamine
either the open port or the hose end. Screw the hose in place
using a 13mm box spanner. Continue with attaching the 2nd
stage. Just screw the nut over the 2nd stage housing, and
secure it firmly by hand.
MOUNTING THE HOSE
If you have a Oxy, Deco or Duration model, be absolutely
sure not to touch the o-ring or other inner connection areas
with your fingers, since fingerprints are a combustible con-
tamination.
OXYGEN ALERT!
PRE DIVE
The procedure described below only describes the manner
in which the regulator is assembled, and does not replace all
of the various procedures you have learned in your diving
training program.
Xstream must always be used with minimum the following
SCUBA equipment :
- Compressed gas cylinder(s) conforming to natio-
nal regulations
- Frame or holding device for the cylinder(s) with
the possibility to mount the harness
- A safety system, including at least one of the follo
wing:
- A submersible pressure gauge
- A reserve valve
- An active low pressure warning device
1) Always check the gas-content of the cylinder before at-
taching the regulator.