PosDelta D45, Programmer'S Manual

Page: 25 / 31

[Reference] FS ? ， FS C
43
．
FS ? c1 c2
[Name] Cancel user-defined Kanji characters
[Format] ASCII FS ? c1 c2
Hex 1C 3F c1 c2
Decimal 28 63 c1 c2
[Range] <Available in Simplified Kanji supporting models>
c1 = FEH
A1H
≤ c2 ≤ FEH
[Description] Cancels user-defined Kanji characters
[Details] • This command cancels the user-defined Kanji characters specified by c1 and c2 .
Spaces are the substitute.
• If there is no user-defined Kanji characters defined, the printer will ignore this
command.
[Reference] FS 2 ， FS c
44
．
FS S n1 n2
[Name] Set Kanji characters spacing
[Format] ASCII FS S n1 n2
Hex 1C 53 n1 n2
Decimal 28 83 n1 n2
[Range] 0 ≤ n1 ≤ 32
0 ≤ n2 ≤ 32
[Description] Sets left- and right-side Kanji character spacing n1 and n2 , respectively.
[Details] • When double-width mode is set, the left- and right-side character spacing is twice the
normal value.
• Unit of spacing between Kanji characters is half dot.
[Default] n1 = 0 ; n2 = 2
45
．
FS W n
[Name] Turn quadruple-size mode on/off for Kanji characters
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Range] 0 ≤ n ≤ 255
[Description] Turns quadruple-size mode on/off for Kanji characters.
• When the LSB of n is 0, quadruple-size mode for Kanji characters is turned off.
• When the LSB of n is 1, quadruple-size mode for Kanji characters is turned on.
[Details] • Only the lowest bit of
n is valid.
• In quadruple-size mode, the printer prints the same size characters as when
double-width and double-height modes are both turned on.
[Default] n = 0
[Reference] FS !