PosDelta D45, Programmer'S Manual

Page: 12 / 31

[Format] ASCII ESC - n
Hex 1B 2D n
Decimal 27 45 n
[Range] n = 0 ， 1 ， 48 ， 49
[Description] Turns underline mode on or off, based on the following values of n :
n Function
0, 48 Turn off underline mode
1, 49 Turn on underline mode
[Details]
• The printer can underline all characters (including right-side character spacing), but
cannot underline the space set by
HT.
• Underline mode can also be turned on or off by using
ESC !
.
• This command is ignored when n exceeds the specified range.
• This command does not affect the setting of Kanji characters.
[Default] n = 0
12
．
ESC 2
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description] Selects 1/ 6-inch(approximately 4.23mm) line spacing.
[Reference] ESC 3
13
．
ESC 3 n
[Name] Set line spacing
[Format] ASCII ESC 3 n
Hex 1B 33 n
Decimal 27 51 n
[Range] 0 ≤ n ≤ 255
[Description] Sets the line spacing to [ n x 0.176 mm (1/44inches)].
[Default] n = 24
[Reference] ESC 2
14
．
ESC <
[Name] Return home
[Format] ASCII ESC <
Hex 1B 3C
Decimal 27 60
[Description] Moves the print head to the standby position.
[Details]
• Print head moves to the left end first, then right end and finally back to the left end.
• Left end position is detected by the initial position sensor
• For the detection of initial position, print position can be offset when using this
command.